Free standing Mosquito Net
Mosquito Net used in conjunction with the Freestander
was the pyramid lightweight wedge, it was placed over
the frame and tucked under the mattress.
Freestanding Mosquito Net Stand - aluminum packed
Height approx 49"/1.25m on a 3ft wide bed
Weight approx 300g complete
Packed Size 32cm x 8cm
Fibre Glass Single
Height approx 47"/1.25m on a 3ft wide bed
Weight approx 380g complete
Packed Size 36cm x 8cm
Fibre Glass Double
Height approx 53 "/1.25m on a 5ft wide bed
Weight approx 420g complete
Packed Size 36cm x 8cm
Free standing mosquito net
This new free standing self supporting mosquito net stand / frame designed by Catch 22 is now available, there are two sizes, single and double, they are manufactured using aluminum or fibre glass poles, they are lightweight, fit almost any bed, virtually any mosquito net can be used together with the Freestander.
Freestander can be purchased with or without a net to veiw more images of different nets used with Freestander click here
With the freestander you will never need to worry about hanging a net again!!!
We know how hard it can be when trying to hang a mosquito net, especially when you have trouble reaching the ceiling or just finding somewhere to anchor the mosquito net. The free standing mosquito net stand "freestander" solves all these problems, the frame can be put up in seconds, it is easy to fit to any bed with a mattress.
Will work with just a mattress on a floor and to make it even more versatile we have a leg extension so it can even be used on the floor with no mattress or bed, this is not out yet (but can be purchased as an add on, at a later date).
Freestander is available in two sizes:
Single Freestander Aluminum
How it Works
Single or Double Freestander Fibre Glass
This free standing self supporting mosquito net stand / frame, erects in seconds, the poles are interconnected by elastic.
Place each end of the pole section through the eyelets of the webbing strap (for aluminium model - the fibre glass model has the webbing strap already connected to the ends of the poles), then lift mattress and slide the webbing strap and frame between the base and mattress, to the required position.
To fix frame, pull the free end of the webbing strap until the bottom of the A frame is tightly held against the side of the mattress this pressure holds the stand firmly in position.
The frame can be moved along the bed and positioned to suit a variety of nets. The mosquito net can then be thrown over the frame as per image or for the smaller nets hung or tied to the top of the frame. The bottom of the net is then tucked under the mattress or for the smaller minimalist nets tucked under a sleeping bag etc
is the strongest and lightest of the freestanders, at a weight of 300gms and a packed length of 32cm it can easily fit into any bag or rucksack. The poles are manufactured from aircraft aluminium, interconnected with elastic chord for easy assembly. Once the adjusting strap has been fitted to the bottom of the poles, and the frame is in position under the mattress, the adjustment strap is tightened until it squeezes the mattress a little, this gives the frame its upright rigidity.
Freestander Fibreglass Single
is slightly bigger and manufactured to fit a single bed. It is erected almost the same way as the single aluminium Freestander. It is some what heavier at 380gms and a packed size of 36cm
Freestander Fibreglass Double
is slightly bigger and manufactured to fit a double bed. It is erected almost the same way as the single aluminium Freestander. It is some what heavier at 420gms and a packed size of 36cm
For more information about Freestander including mosquito net click here
Coming soon the versatile leg extension that will attach to the Freestander so it can even be used on the floor with no mattress or bed, this is not due out for a out yet (but can be purchased as an add on, at a later date).